AOA Camera Code Download

1. From CentDiag, enter the 'quit' command on the command line to quit the control program. Wait 5 seconds for the quit to complete.
2. Open two xterm windows and log onto lgs7 as the root user from both windows.
3. From one of the windows (window 1), type aounload (to unload the control modules).
4. In the other window (window 2), type minicom (to start a minicom session).
5. Cycle power to the AOA camera and be ready to hit the ESC key within 4 seconds.
6. When the BUFFALO message comes up in the minicom window:
   1. hit the ESC key
   2. type load t
7. In window 1, type dnld
8. In minicom (window2):
   1. Wait for the word "done" to be displayed
   2. Type call 4000
   3. If one of the several messages displayed indicates that the data bus is not running, type crt 1
9. Exit minicom by typing CTRL-A X and responding 'yes'.
10. In window 1, type aostart & (to restart the control program).
11. Exit and close both xterm windows.