|
Problem: ShaneAO WFS Lenslet Stage Failure
Manifestation:
-
In Shane AO motor control GUI, Lenslet fails to achieve commanded
position (e.g. attempts to move from 16x to 8x
unsuccessful.
Solution/Recovery:
-
In Shane AO motor control GUI:
-
Repeat attempts to achieve commanded position.
Cause:
-
Low ambient temperatures ≤ 46 -- 44°F (7.7 -- 6.7°C) ---
although one incident reported (2018-05-26) when ambient temperature
circa 55°F.
Associated Issues:
Change Log:
- 2018-05-26: Updated.
- 2017-12-03: Updated.
- 2017-01-17: Updated.
- 2017-01-14: First version.
|